Through-coloured mineral rendering
Monocouche is a coloured, cement-based render used on suitable backgrounds. We can discuss its texture, the preparation your walls need and how it compares with a silicone finish.
Get a Rendering Quote Or call 01904 530924Suitability and current service availability are confirmed when we discuss your project.
Colour within the render
Monocouche contains colour within the mineral render rather than relying on a separate initial coat of masonry paint. For a scraped finish, the applied material is worked at the appropriate stage to create the final texture.
It can be considered for suitable masonry on extensions, new walls and refurbishment projects. Wall construction, background condition, exposure and the product specification determine whether it is appropriate.
The word monocouche does not mean every wall receives one simple pass with no preparation. Application passes, required depth, reinforcement and any preparatory coats depend on the selected system.
Compare monocouche and siliconeSuitability before application
Published monocouche project
The extension shown above is identified in the existing York project record as monocouche coloured render. The record describes preparation of the new walls, basecoat where required and detailing around the openings and edges.
The photograph shows the rendered extension and glazing, with materials and patio work still visible. It supports the rendered extension example, rather than completion of the entire renovation.
Read the York extension projectPreparation, application and finishing
Check the wall construction and existing finishes. Agree the product, preparation, colour, texture and access in the proposed scope.
Protect nearby surfaces, repair the background and install the specified beads, preparation and reinforcement. Do not assume a single build-up suits every wall.
Apply the render to the product requirements and create the scraped finish at the correct stage. Weather and background conditions affect the working sequence.
Check the finished elevations and surroundings. Discuss suitable care and the limits of later colour and texture matching.
Planning your project
Compare a complete written scope, including background preparation and access. A thicker mineral finish and a thin-coat system should not be compared on the topcoat name alone.
It is through-coloured, so a separate paint finish is not normally part of the initial application. Later care or treatment depends on the installed product and exposure; check compatibility before painting.
No. The selected product and background determine preparation, reinforcement and application passes. The name is not a universal instruction to apply directly to any wall.
Only where an appropriate specified system permits it and the background is suitable. Loose, unstable or incompatible existing finishes need attention, and removal may be required.
A local repair may be possible where the background and surrounding render are sound. Matching the original colour and scraped texture can be difficult, particularly after weathering. Wider refinishing may be worth discussing.
Your local project
Tell us your postcode so we can discuss the property and check availability.
Request a rendering quote
Tell us about the walls or extension so we can discuss suitability and current availability. ‘Monocouche rendering’ is selected below, and remains editable.
Call 01904 530924