SPRAY CORK WALL COATINGS
Spray Cork Exterior Wall Coating
Give tired, cracked or weathered exterior walls a clean and modern new appearance with a professionally applied spray cork coating.
Spray cork is a breathable and flexible exterior wall finish containing natural cork granules. It can be applied to a range of properly prepared surfaces, including brickwork, existing render, painted walls and certain pebbledash finishes.
Recently Rendered provides a complete service covering wall repairs, preparation, priming and the professional spray application of your selected cork finish.
Our promise
Your trusted partner for spray cork wall coatings
A successful exterior coating depends on much more than the final finish. The walls must be inspected, repaired and properly prepared before any spray cork coating is applied.
Our experienced team manages every stage of the work, from assessing the existing surface through to protection, repairs, priming, application and the final clean-down.
Spray Cork Exterior Wall Coating in York
EXTERIOR WALL COATINGS
Spray Cork Wall Coating
Spray cork is a thin exterior wall coating made using granulated natural cork, specialist binders and colour pigments.
It is professionally spray applied to create a seamless, lightly textured finish across the exterior walls. The completed surface provides a breathable and water-repellent coating that helps protect the property from normal exposure to rain, wind, frost and changing temperatures.
Its flexibility makes it less rigid than many traditional cement-based finishes, helping it accommodate a degree of minor surface movement when applied over a stable and correctly prepared background.
-
Breathable and water-repellent exterior finish
-
Flexible cork-based wall coating
-
Attractive, lightly textured appearance
-
Suitable for traditional and modern properties
RENDER REFURBISHMENT
Spray Cork Over Existing Render
Spray cork can provide an effective way to modernise tired, faded or previously painted exterior render where the existing surface remains securely bonded.
Before recommending an overcoating system, we inspect the walls for cracks, hollow areas, loose render, water penetration and unstable paint. Failed sections must be removed and repaired rather than simply covered.
Once the walls have been made sound, the surface is cleaned and prepared using the appropriate repair materials, primer or reinforced basecoat. The spray cork coating is then applied evenly across the elevations to create a fresh and consistent finish.
-
Refreshes faded and weathered exterior render
-
May avoid unnecessary complete render removal
-
Cracks and damaged areas repaired beforehand
-
Covers uneven colour and previous decoration
-
Creates a consistent finish across full elevations
PROPERTY TRANSFORMATIONS
Spray Cork Over Pebbledash and Brickwork
Weathered brickwork and older pebbledash can leave a property looking tired, patchy and difficult to maintain.
Where the existing surface is stable and suitable, spray cork can be applied as part of a carefully prepared refurbishment system. This creates a more uniform exterior appearance while retaining the textured character of a sprayed wall finish.
Pebbledash must be assessed for hollow or loose areas before coating. Damaged sections may need to be removed and repaired, while highly uneven surfaces may require additional preparation or a basecoat before the cork finish is applied.
Brickwork must also be clean, stable and free from defects that could affect the coating.
-
Modernises dated pebbledash and brickwork
-
Creates a cleaner, more consistent appearance
-
Loose and unstable areas repaired beforehand
-
Thin application with minimal additional wall thickness
-
Suitable for full-property exterior transformations
BENEFITS OF SPRAY CORK
Why Choose a Cork-Based Exterior Wall Coating?
We assess each property individually and explain what the system can realistically achieve before recommending any work.
Flexible finish
Spray cork offers greater flexibility than many hard exterior coatings and can accommodate a degree of minor surface movement.
Low-maintenance exterior
The coloured finish does not require immediate painting and can remain attractive with occasional cleaning and suitable maintenance.
Breathable coating
The vapour-permeable finish allows moisture vapour to move through compatible exterior wall constructions.
Weather resistance
Helps protect properly prepared exterior walls from normal exposure to rain, frost, wind and sunlight.
Thermal and acoustic properties
Natural cork has useful thermal and acoustic characteristics that may contribute to improved wall-surface comfort and reduced exterior noise.
Choice of colours
Available in a range of traditional, neutral and contemporary shades to complement different property styles.
How we work
How we apply
spray cork exterior coatings
Correct inspection, preparation and application are essential for creating an attractive and reliable exterior finish.
01
Survey and quotation
We inspect the exterior walls and assess the existing brickwork, render, pebbledash or painted surface. We identify loose areas, cracking, water damage and preparation requirements before providing a clear written quotation.
02
Protection and preparation
Windows, doors, roofs, paving and surrounding surfaces are carefully protected. The walls are cleaned and any loose coatings, damaged render or unstable sections are removed and repaired.
03
Primer and spray application
The appropriate primer, reinforcement or basecoat is applied where required by the selected system. The cork coating is then professionally spray applied in controlled layers to produce an even texture and consistent colour.
04
Sign-off & clean-down
The completed elevations are inspected for consistency and finishing detail. All masking and protection are removed before the surrounding working area is thoroughly cleaned.
PROJECT GALLERY & REVIEWS
From Tired and Weathered to Clean and Modern
View examples of exterior wall refurbishments completed by the Recently Rendered team.
Our projects demonstrate the preparation, repairs and attention to detail involved in transforming tired render, pebbledash and exterior masonry.
As our spray cork portfolio grows, we will add dedicated before-and-after photographs showing the available colours, textures and finished appearance of cork-coated properties.
5 star rating
Areas we serve
Spray Cork Exterior Wall Coatings Across Yorkshire
Recently Rendered provides professional spray cork exterior wall coatings for residential and commercial properties throughout Yorkshire.
Our team works across York, Harrogate, Knaresborough, Wetherby, Ripon, Leeds and the surrounding towns and villages.
Contact us to check availability in your area and arrange a property survey
Some of the areas we serve
Serving both residential and commercial properties in a wide range of counties, we can tackle home improvement projects.
-
York
-
Harrogate
-
Knaresborough
-
Wetherby
-
Ripon
-
Leeds
-
Selby
-
Tadcaster
-
Easingwold
-
Thirsk
-
Malton
-
Northallerton
Recently Rendered
Professional spray cork coatings and exterior rendering for homes and commercial properties.
Our services include cork wall coatings, silicone rendering, monocouche rendering, render repairs and complete exterior wall refurbishments.
Contact our team to arrange a survey or request a quotation.
Help center
Got a question?
Get your answer
Spray cork is still a relatively unfamiliar exterior finish for many homeowners.
You may be wondering how it differs from masonry paint, whether it can be applied over pebbledash or how much preparation your walls will need.
The answers below cover some of the most common questions we receive about spray cork exterior wall coatings.
Masonry paint is primarily a decorative coating applied by brush, roller or spray.
Spray cork contains natural cork granules and creates a thicker, textured and more flexible finish. It also has breathable, thermal and acoustic properties.
Neither option should be applied over loose, unstable or badly damaged walls without completing the appropriate repairs first.
Spray cork can often be applied over existing render where the original surface remains stable, securely bonded and compatible with the coating system.
Loose or hollow render must be removed and repaired. Cracks may also require treatment or reinforcement before the cork coating is applied.
We inspect the walls before recommending the correct preparation.
It may be possible to apply spray cork over stable pebbledash, but the surface must first be carefully inspected.
Loose stones, hollow sections, cracks and damaged areas must be repaired. Very rough or uneven pebbledash may require additional basecoat preparation before the final cork finish.
The existing pebbledash should not simply be covered if it has already lost its bond with the wall.
Spray cork may be applied to suitable brickwork once the surface has been properly inspected and prepared.
Damaged pointing, loose bricks, staining and sources of water penetration must be dealt with first.
The brickwork may also require cleaning, repairs, primer or a levelling coat depending on its condition and the finish required.
Spray cork is flexible and can accommodate a degree of minor surface movement.
It cannot guarantee that cracks will never appear. Structural movement, unstable render and unresolved defects can still cause cracking through any exterior finish.
Existing cracks should be assessed and repaired before application.
Stable hairline cracks may be treated as part of the preparation before spray cork is applied.
Larger, recurring or structural cracks must be investigated rather than simply hidden beneath a new coating.
Reinforcement mesh or a complete basecoat system may be required where cracking is more widespread.
Spray cork is designed to create a water-repellent exterior finish that helps protect walls from normal exposure to rain, frost, wind and sunlight.
It will not resolve water ingress caused by defective gutters, roofs, flashing, pointing or structural cracks.
These issues must be repaired separately before the coating is applied.
Spray cork is generally designed to allow moisture vapour to pass through the finished coating.
This can make it suitable for many modern and traditional properties, provided the complete wall construction and existing materials are compatible.
The walls should still be assessed before choosing a system, particularly on older solid-wall buildings.
.
Natural cork has useful thermal properties and a spray cork coating may help improve wall-surface comfort and reduce heat transfer through the treated surface.
Because the coating is relatively thin, it should not be presented as equivalent to a thick insulation-board system.
The actual improvement will depend on the existing wall construction and application specification.
Cork has natural acoustic characteristics and may help reduce some exterior noise passing through the treated surface.
The level of improvement will depend on the complete wall construction, windows, doors, coating thickness and type of noise.
Spray cork should not be described as complete soundproofing.
Spray cork is supplied as a coloured finish and does not require painting immediately after application.
Like any exterior surface, it may still require occasional cleaning, inspection or maintenance as it ages.
Future recoating requirements will depend on the product, exposure and condition of the walls.
No exterior finish should be advertised as completely maintenance-free.
Spray cork is designed to provide a low-maintenance coloured finish, but walls may still collect dirt, algae or marks depending on their location and exposure.
Regular inspection, careful cleaning and prompt repair of defects will help preserve the finish.
Spray cork is available in a selection of neutral, traditional and contemporary shades.
The precise range depends on the manufacturer and coating system chosen for the project.
Colour samples can be provided during the quotation process.
A professionally specified and applied spray cork coating is designed to provide a durable, long-term exterior finish.
Its lifespan depends on the product, wall preparation, property exposure, application quality and maintenance.
Any manufacturer guarantee available for the selected product will be explained in the written quotation.
Some spray cork products may be offered with extended manufacturer guarantees when installed by eligible contractors in accordance with the required specification.
Only advertise a 25-year guarantee when your chosen product, installer status and warranty registration process qualify.
The exact terms, exclusions and maintenance requirements should be provided with the quotation.
The cost depends on:
- Size and height of the property
- Type and condition of the existing walls
- Amount of preparation and repair work
- Whether reinforcement or a basecoat is required
- Scaffolding and access requirements
- Number of elevations being coated
- Selected colour and coating system
We normally inspect the property before providing a detailed written quotation.
Request Free Quote
Get a Free Spray Cork Coating Quote
Tell us about your property and the exterior walls you would like to transform.
You can include details about the existing brickwork, render, pebbledash or painted finish, along with any cracking, staining or damaged areas.
Our team can then arrange a property survey and provide a clear written quotation for the recommended preparation and coating system.
Professional spray cork exterior wall coatings for homes and commercial properties throughout Yorkshire.
Ready to transform your exterior?
Does Rendering Add Value to Your Home in the UK: Real Examples and Return on Investment Analysis
Rendering your home can increase its value by 5–10% on average, translating to approximately £15,000 to £30,000 on a typical £300,000 property. At Recently Rendered, we’re asked about return on investment regularly — and it’s a question we take seriously, because we believe every client deserves an honest picture of what their investment will deliver […]
Why Silicone Render is the Best Choice for Yorkshire Homes: Superior Protection Against Rain, Damp and Long-Term Durability
Yorkshire’s relentless rain and unpredictable weather patterns demand exterior finishes that can withstand constant moisture exposure whilst preventing damp from compromising your home’s structure. At Recently Rendered, silicone render is the finish we recommend most consistently to Yorkshire homeowners — and after years of installing it across the region, we’ve seen first-hand why it outperforms […]
Do I Need Scaffolding for Rendering: Complete UK Cost and Safety Requirements
Rendering transforms the exterior of your home, but whether you need scaffolding depends on your property’s height, the scope of work, and UK safety regulations. At Recently Rendered, scaffolding isn’t an afterthought — it’s a fundamental part of how we plan and price every project, ensuring our teams work safely and your finish is applied […]
27 Newborough St, Clifton, York YO30 7AS
01904 530924
Mon-Fri: 08:00-18:00